AP2114HA fixed voltage regulator pinout

The AP2114HA is the fixed-output AP2114 in the SOT-223 layout with a grounded tab. It has three externally available pins.

SOT-223 (HA)

4 contacts Current package

Diodes Incorporated / BCD · Three lead positions and a connected metal tab.

1.8 V fixed output.

SOT-223 (HA) pinout

SOT-223 (HA)

View from the marked face, with the tab above the body and leads 1–3 below from left to right. Scroll the map to reach all contacts.

Selected pin details

1 · VIN

Supply · Power

Unregulated positive supply. Allow voltage headroom for dropout and keep the return path short.

Diodes / BCD AP2114 Rev. 2.2, Figure 2

Electrical limits · Link to this pin

All 4 pins

Pin	Signal	Direction	Function
1	VIN Supply	Supply	Unregulated positive supply. Allow voltage headroom for dropout and keep the return path short.
2	GND Return	Return	Supply and load return for the fixed-voltage regulator.
3	VOUT Output	Output	Regulated output. Fit the output capacitor close to the device.
TAB	GND Return	Return	Metal tab connected to GND internally. Include its net when laying out the footprint.

Signal assignments

Regulated supply

The input must exceed the selected output by the dropout headroom at the actual load. Check dissipation from input–output voltage difference times load current.

Electrical limits

Parameter	Limit	Conditions and source
Nominal output1.8 V	1.8 V	Fixed output selected by the order code. Diodes / BCD AP2114 Rev. 2.2, Ordering Information
Input supply2.5–6.0 V	2.5–6.0 V	Recommended range. VIN must also provide headroom for the selected VOUT and load. Diodes / BCD AP2114 Rev. 2.2, Recommended Operating Conditions
Output current class1 A	1 A	Electrical test limits are version-specific. At large VIN − VOUT, SOT-223 thermal dissipation can become the limiting factor. Diodes / BCD AP2114 Rev. 2.2, Electrical Characteristics
Operating ambient−40 to +85 °C	−40 to +85 °C	Recommended ambient temperature range. Diodes / BCD AP2114 Rev. 2.2, Recommended Operating Conditions

Models and documents

All five HA output codes share the same pinout. The AP2114H uses a VOUT tab and a different pin order.

AP2114HA-1.2TRG1: 1.2 V fixed output.
AP2114HA-1.5TRG1: 1.5 V fixed output.
AP2114HA-1.8TRG1: 1.8 V fixed output.
AP2114HA-2.5TRG1: 2.5 V fixed output.
AP2114HA-3.3TRG1: 3.3 V fixed output.

Diodes / BCD AP2114 Rev. 2.2· Figure 2, ordering information, operating limits and electrical test conditions.
Source register· Document revisions, applicable order codes, consulted sections and available file checksums.