Spark Logic

HX8367 TFT LCD controller connection guide

HX8367 TFT LCD controller Winstar WF0283ATDAJDNN0 · 47-contact FPC wiring guide with power, signal assignments, and bench checks.

Winstar WF0283ATDAJDNN0 · 47-contact FPC

47 contacts Current package

Himax ·

Check the panel on its configured carrier

Required

Connect the panel to a matching 47-contact carrier that provides the panel supplies, mode straps and separate backlight driver. Check the carrier against the module’s contact table before powering up.

  • Analog supply contact
  • Module VCC contact
  • I/O supply
  • Ground
  • Active-low reset
    • RESET (5)
    • Carrier reset output in the I/O supply domain
  • Backlight anode
  • Backlight cathode 1
  • Backlight cathode 2
  • Backlight cathode 3

Bench checks

  • Measure VCI and IOVCC and confirm the reset transition. Check the actual carrier’s VCC connection and LED current against its panel design.
  • Run the initialization for the fitted HX8367-A and the carrier’s selected host interface. Use a full-screen color pattern to confirm the transfer.

Winstar WF0283ATDAJDNN0, pp. 2–5, operating conditions and LCM pin definition. Winstar News Issue 118 identifies HX8367-A in the WF0283A.

Winstar WF0283ATDAJDNN0 · 47-contact FPC wiring map

Highlighted contacts are used in the required step or selected circuit. Select a contact to inspect it.

Winstar WF0283ATDAJDNN0 · 47-contact FPC
Match contact 1 to the module outline drawing. The flex contact pitch is 0.8 mm.
Selected pin details

15 · DB12

Bidirectional · Data

Display data bus bit 12.

Winstar WF0283ATDAJDNN0, pp. 2–5, operating conditions and LCM pin definition.

Electrical limits · Pin in the reference

Models and documents

The map covers the 47-contact WF0283ATDAJDNN0 described by Winstar. The manufacturer lists HX8367-A or an equivalent driver, so check which controller is fitted before selecting initialization.

Winstar WF0283ATDAJDNN0
240 × 320 transflective panel, 47 contacts.