Spark Logic

ILI9881C TFT LCD controller connection guide

ILI9881C TFT LCD controller Winstar WF70D4SYAUMNN0 · 40-contact FPC wiring guide with power, signal assignments, and bench checks.

Winstar WF70D4SYAUMNN0 · 40-contact FPC

40 contacts Current package

ILI Technology ·

Connect to a two-lane DSI host

Required

Use a carrier designed for this FPC and a host with a two-lane DSI PHY. Check both supply rails and connect the separate constant-current backlight driver before the first display test.

Bench checks

  • Match FPC contact 1 to the carrier and verify the power rails before releasing reset. Confirm DSI clock and both data-pair polarities.
  • Start the host with the initialization sequence and DSI timings supplied for WF70D4SYAUMNN0, then display solid colors. If the panel remains dark, verify backlight current and DSI initialization separately.

Winstar WF70D4SYAUMNN0, Interface Pin Function and Typical Operation Conditions. ILI Technology ILI9881C datasheet, MIPI DSI interface and power pins.

Winstar WF70D4SYAUMNN0 · 40-contact FPC wiring map

Highlighted contacts are used in the required step or selected circuit. Select a contact to inspect it.

Winstar WF70D4SYAUMNN0 · 40-contact FPC
Match contact 1 to the module outline drawing. The flex contact pitch is 0.5 mm.
Selected pin details

33 · GND

Supply return · Ground

Connect to host ground.

Winstar WF70D4SYAUMNN0, Interface Pin Function and Typical Operation Conditions.

Electrical limits · Pin in the reference

Models and documents

This map covers the 40-contact FPC of the Winstar WF70D4SYAUMNN0 without touch. Other ILI9881C modules have their own lane count, wiring and initialization.

Winstar WF70D4SYAUMNN0
40-contact FPC, two DSI lanes and no touch panel.