Spark Logic

ILI9225 TFT LCD controller pinout

The ILI9225 integrates a 176 × 220 display memory and a TFT controller. The MAR2201 module exposes a write-oriented serial display interface.

MAR2201 · 11-contact header

11 contacts Current package

ILI Technology ·

MAR2201 · 11-contact header pinout

MAR2201 · 11-contact header
Follow the numbered contact or silkscreen on the exact module. The display and solder sides mirror each other.
Selected pin details

3 · GND

Supply return · Ground

Connect to host ground.

LCDWiki MAR2201 interface definition and 2.2-inch SPI board schematic.

Electrical limits · Link to this pin

All 11 pins

PinSignalDirectionFunction
1VCC Supply inputSupply input Module supply. The manufacturer lists 3.3 V and 5 V operation.
2GND Supply returnSupply return Connect to host ground.
3GND Supply returnSupply return Connect to host ground.
4NC NoneNone Reserved contact. Leave open.
5NC NoneNone Reserved contact. Leave open.
6LED InputInput High enables the backlight. The vendor specifies a 3.3 V high level for continuous operation.
7CLK InputInput Display serial clock.
8SDI InputInput Serial data from the host.
9RS InputInput Register index/data selection. Use the MAR2201 initialization library to drive this line.
10RST InputInput Active-low hardware reset.
11CS InputInput Active-low display selection.

Signal assignments

Display SPI

The host sends the clock and display data. The separate D/C line distinguishes command or register index from data.

Electrical limits

ParameterLimitConditions and source
Module supply3.3 V or 5 V3.3 V or 5 V Verify the supply setting on the module before connecting it. LCDWiki MAR2201 interface definition and 2.2-inch SPI board schematic.
Panel pixels176 × 220176 × 220 Portrait address coordinates. LCDWiki MAR2201 interface definition and 2.2-inch SPI board schematic.
Pixel formatRGB565RGB565 The module example uses 16-bit RGB values for its color test. LCDWiki MAR2201 interface definition and 2.2-inch SPI board schematic.

Models and documents

The pin map covers the 2.2-inch MAR2201 module header. The linked Ilitek datasheet describes the controller die and its alternative interfaces.

MAR2201
2.2-inch module with a separate backlight enable input.